6SN1162
update£º2016-04-27 23:53 Click£ºtimes
- brand
- model
- describe
In order to meet the requirements of the EMC (electromagnetic compatibility), the power filter should be used, at the same time, each motor cable All the cables between the source filter, the rectifier reactor and each feed module should b
introduce
In order to meet the requirements of the EMC (electromagnetic compatibility), the power filter should be used, at the same time, each motor cable
All the cables between the source filter, the rectifier reactor and each feed module should be shielded. For a more detailed
Section, please refer to the "SINUMERK, SIROTEC, EMC SIMODRIVE installation guide" design guide.
Shielding plate which is matched with various modules is used to connect the shield connecting piece of each motor power cable. The shield plate is equipped with a ready
The installation position for connecting the brake terminals.
Contact type shield clamp
According to the requirement of electromagnetic compatibility, the potential point of each signal cable is connected to the mounting bracket of the module casing by the contact type shield clip.
At. The shielding clip can be arranged on the screw threads on the driving power module and the power module which is provided with a variety of closed loop control insertion units.
Model for non - regulated drive power modules:
Internal cooling: 6SN1162-0EA00-0AA0
6SN1162-0EA00-0BA0
6SN1162-0EA00-0CA0
6SN1162-0EA00-0JA0
6SN1162-0EA00-0DA0
ÉÏһƪ£ºSIEMENS high frequency rectifier reactor 6SN1111-0AA00-
ÏÂһƪ£º6SN1111-0AB00-0AA0
more
