The structure is compact and highly integrated in the integration of the numerical control unit, the operation panel, the machine tool operation panel and the input and output unit

The machine tool debugging configuration data is few, the system and the machine tool match more quickly, more easily.

Simple and friendly programming interface, to ensure that the production of fast, optimized the use of machine tools

802C base line SINUMERIK integrates all the CNC, PLC, HMI, I/O in one body:

Can be installed independently of other components. Strong and space saving design, so that it can be installed to the most user-friendly location

The operation panel provides all of the CNC operations, programming and machine control action buttons as well as a 8 inch LCD display, while also providing 12 user defined keys with LED. Working mode selection (6 kinds), the feed rate is adjusted, the spindle speed is adjusted, the numerical control start and the numerical control stop, the system reset all uses the key form to carry on the operation

802C base line SINUMERIK input / output point for 48 24V DC input and 16 24V DC output. At the same time the output coefficient is 0.5 the load capacity of up to 0.5A. In order to facilitate the installation, input and output by the mobile terminal clamping screw, the terminal can be ordinary screwdriver to tighten

SINUMERIK 802C base line can control three axes. SINUMERIK 802C base line 10V. The traditional servo driver interface

In addition to the three axes, SINUMERIK 802C base line provides a + 10V interface for connecting spindle drive

SINUMERIK 802C base line drive system for basic configuration

SIMODRIVE base - line, 3Nm/6Nm and 6Nm/8Nm and double module

11Nm single - axis module, drive with monopole on the rotating transformer 1FK 7 servo motor,

When the power need to be extended, can choose SIMODRIVE 611U.

- drive system and with monopole on the rotating transformer 1FK 7 servo motor

SINUMERIK 802C base line control software has been stored in the NC part of the Flash-EPROM (flash), Toolbox (software tools used to adjust the software tools) included in the standard scope of supply. The system requires no batteries, maintenance free design. By using the capacitance to prevent data loss caused by power off. The program changes and new software store. The software system for lathe and milling machine application, and can be installed separately. A lathe and milling machine PLC program examples are included in each tool box, so that users can quickly complete the debugging