Its characteristics are as follows:

The structure is compact and highly integrated in the integration of the numerical control unit, the operation panel, the machine tool operation panel and the input and output unit

The machine tool debugging configuration data is few, the system and the machine tool match more quickly, more easily.

Simple and friendly programming interface, to ensure that the production of fast, optimized the use of machine tools

802S base line SINUMERIK integrates all the CNC, PLC, HMI, I/O in one body:

Can be installed independently of other components. Strong and space saving design, so that it can be installed to the most user-friendly location

The operation panel provides all of the CNC operations, programming and machine control action buttons as well as a 8 inch LCD display, while also providing 12 user defined keys with LED. Working mode selection (6 kinds), the feed rate is adjusted, the spindle speed is adjusted, the numerical control start and the numerical control stop, the system reset all uses the key form to carry on the operation

802S base line SINUMERIK input / output point for 48 24V DC input and 16 24V DC output. Output at the same time, the load capacity of 0.5 when the load capacity of up to 0.5A. In order to facilitate the installation, the input and output can be used to move the screw clamping terminal, the terminal can be used as a common screwdriver to tighten the

802S base line SINUMERIK can control three feed shaft.

Base line SINUMERIK802S to provide the pulse and direction of the signal stepper driver interface.

In addition to the three feed shaft, 802S base line SINUMERIK provides a + 10V interface for connecting spindle drive.

802S base line SINUMERIK control software has been stored in the numerical control part of the Flash-EPROM (flash memory), Toolbox software tools (to adjust the software tools used) included in the standard scope of supply. System no longer requires battery, maintenance free design. Using capacitor to prevent data loss caused by power loss. Program changes and new program software storage. System software for the application of the lathe and milling machine, and can be installed separately. In each of the tool box contains a lathe and milling machine PLC program example, so that users can quickly debug completed.